1-6
X10DRL-CT/-iT/-C Motherboard User’s Manual
Warning!
To avoid damaging the power supply or the motherboard, be sure to use a power
supply that contains a 24-pin and two 8-pin power connectors. Be sure to connect the
power supply to the 24-pin power connector (J24), and two 8-pin power connectors
(JPWR1, JPWR2) on the motherboard. Failure in doing so may void the manufacturer
warranty on your power supply and motherboard.
LED Description Color/State Status
LEDPWR Onboard Power LED Green/Solid System Power On
LEDBMC BMC Heartbeat LED Green/Blinking BMC Normal
UID UID Switch Indicator Blue/Steady UID Switch is On
X10DRL-CT/-iT/-C LED Indicators
Motherboard Model Differences
Model 10Gb LAN Support SAS Support
X10DRL-CT Yes Yes
X10DRL-C No Yes
X10DRL-iT Yes No
To Next Page
Loading...
