Supermicro X10SLH-LN6TF - BMC Network Configuration; Configuration Address Source; IPMI LAN Selection; IPMI Network Link Status

4-28
X10SLH-LN6TF User’s Manual
BMC Network Conguration
The following items will be displayed:
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is Failover.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is Shared LAN.
Update IPMI LAN Conguration
Select Yes for the BIOS to implement all IP/MAC address changes at the next
system boot. The options are No and Yes
Conguration Address Source
Use this item to select the source of the IP address for this computer. If Static is
selected, you will need to know the IP address of this computer and enter it to the
system manually in the eld. If DHCP is selected, the BIOS will search for a DHCP
(Dynamic Host Conguration Protocol) server in the network that is attached to
and request the next available IP address for this computer. The options are DHCP
and Static.
The following items are assigned IP addresses automatically if DHCP is selected,
or they can be congured manually if Static is selected.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).