Supermicro X10SLH-LN6TF - Jumper Settings; Explanation of Jumpers; GLAN Enable;Disable

2-32
X10SLH-LN6TF User’s Manual
A
IPMI CODE
CA
BIOS
LICENSE
BAR CODE
MAC CODE
CA
A
C
A
C
A
+
JLAN3
JLAN2
JLAN1
JP1000
JPW1
JPW2
JSTBY1
J4
LE6
DIMM1
DIMM2
DIMM4
DIMM3
FAN4
FAN3
FAN2
FAN1
FANA
JPME1
JI2C1
JPME2
JI2C2
JPUSB1
JPL1
JPL2
JPL3
JPG1
JBR1
JWD1
JLED1
LE5
LE4
LE1
LE3
J3
JL1
JLED_LAN4 JLED_LAN3
JLED_LAN6
JLED_LAN5
JPI2C1
JTPM1
T-SGPIO1
T-SGPIO2
JSD2
JSD1
SPKR1
B1
JBT1
JF1
SW1
COM1
COM2
PCH SLOT4 PCI-E 2.0 X4(IN X8)
DESIGNED IN USA
X10SLH-LN6TF
REV:1.01
USB0(3.0)
USB1(3.0)
USB12/13
USB8/9
CPU SLOT6 PCI-E 3.0 X8(IN X16)
I-SATA0
I-SATA2
I-SATA1
I-SATA3
I-SATA4
I-SATA5
VGA
LAN5/6
LAN3/4
LAN1/2
USB4/5 (2.0)
USB2/3(3.0)
JLED1:3 pin Power LED
IPMI LAN
JF1
NIC2
NIC1
ON
PWR
X
RST
OH/
FF
LED
LED
HDD
X
PWR
NMI
C226
X540
X540
X540
BMC
PLX
C
2-8 Jumper Settings
Explanation of Jumpers
To modify the operation of the motherboard,
jumpers can be used to choose between
optional settings. Jumpers create shorts be-
tween two pins to change the function of the
connector. Pin 1 is identied with a square
solder pad on the printed circuit board.
Note: On two-pin jumpers, "Closed"
means the jumper is on, and "Open"
means the jumper is off the pins.
A. JPL1: LAN1/2 Enable
B. JPL2: LAN3/4 Enable
c. JPL3: LAN5/6 Enable
GLAN Enable/Disable
Jumpers JPL1/JPL2/JPL3 enable or disable
LAN ports 1/2/3 on the motherboard. See
the table on the right for jumper settings. The
default setting is enabled.
GLAN Enable
Jumper Settings
Jumper Setting Denition
1-2 Enabled (default)
2-3 Disabled
A
B