Supermicro X10SLH-LN6TF - Change Settings; Intel Server Platform Services Configuration; Serial Port; Serial Port 1 Configuration; Serial Port 2 Configuration

4-20
X10SLH-LN6TF User’s Manual

Intel Server Platform Services Conguration
The following status information for this motherboard are displayed:
•ME BIOS Interface Version
•SPS Version
•ME FW (Firmware) Status Value
•ME FW State
•ME FW Operation State
•ME FW Error Code
•ME NM FW Status Value
•BIOS Booting Mode
•Cores Disabled
•ME FW SKU Information
•End-of-POST Status

Super IO Conguration
Super IO Chip NCT6776F

Serial Port 1 Conguration / Serial Port 2 Conguration
Serial Port
Select Enabled to enable the onboard serial port. The options are En-
abled and Disabled.
Change Settings
This option species the base I/O port address and the Interrupt Request
address of Serial Port 1 and 2. Select Auto to let the BIOS automatically
assign the base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 10, 11), (IO=2F8h; IRQ=3, 4, 10, 11), (IO=3E8h; IRQ=3, 4,
10, 11) and (IO=2E8h; IRQ=3, 4, 10, 11).