Chapter 4: UEFI BIOS
103
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages
to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are Disabled and
Enabled.
Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console Redirection
for Legacy OS support. The options are 80x24 and 80x25.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal
emulator designed for the Windows OS. The options are VT100, LINUX, XTERMR6, SCO,
ESCN, and VT400.
Redirection After BIOS Post
Use this feature to enable or disable Legacy Console Redirection after BIOS POST. When
the option-Bootloader is selected, Legacy Console Redirection is disabled before booting
the OS. When the option-Always Enable is selected, Legacy Console Redirection remains
enabled upon OS bootup. The options are Always Enable and Bootloader.
Legacy Console Redirection Settings
Legacy Console Redirection Settings
Use this feature to select the COM port to display redirection of Legacy OS and Legacy
OPROM messages. The options are COM1 and COM2/SOL.
Serial Port for Out-of-Band Management/Windows Emergency Management
Services (EMS)
The feature allows the user to confi gure Console Redirection settings to support Out-of-
Band Serial Port management.
Console Redirection (for EMS)
Select Enabled to use a COM port specifi ed by the user for EMS Console Redirection. The
options are Enabled and Disabled.
*If the item above set to Enabled, the following items will become available for user's
confi guration:
To Next Page
Loading...
