Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual
124
4.4 Event Logs
Use this feature to confi gure Event Log settings.
Note: After you've made a change on a setting below, please be sure to reboot the
system for the change to take effect.
Change SMBIOS Event Log Settings
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable SMBIOS (System Management BIOS) Event Logging during system
boot. The options are Enabled and Disabled.
Erasing Settings
Erase Event Log
Select "No" to keep the event log without erasing it upon next system bootup. Select "Yes,
Next Reset" to erase the event log upon next system reboot. The options are "No", "Yes,
Next Reset", and "Yes, Every Reset".
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when the
event log is full. Select Do Nothing for the system to do nothing when the SMBIOS event log
is full. The options are Do Nothing and Erase Immediately.
To Next Page
Loading...
