Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual
174
Appendix F
Secure Boot Settings
Secure boot is a feature of UEFI (Unifi ed Extensible Firmware Interface) that ensures boot
loaders are digitally signed and validated. The F.1, F.2, and F.3 sections provide instructions
on how to enable the secure boot features. The F.4 section states Key Management settings.
F.1 Boot mode select Feature
Press <Del> during system boot to enter the BIOS Setup utility. Navigate to the Boot tab.
Use the arrow keys to select Boot mode select and press <Enter>. The options are LEGACY,
UEFI, and DUAL. Set Boot mode select to UEFI. For the changes to take effect, press <F4>
to save the settings and exit the BIOS Setup utility.
To Next Page
Loading...
Need help?
General
