Supermicro X11DPH-T - Page 92

Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual
92
Intel® VMD for Volume Management Device on CPU2
VMD Confi guration for PStack0/VMD Confi guration for PStack1/VMD
Confi guration for PStack2
Intel® VMD for Volume Management Device for PStack0/Intel® VMD for Volume
Management Device for PStack1/Intel® VMD for Volume Management Device for
PStack2
Select Enable to enable Intel Volume Management Device Technology support for the
root port specifi ed by the user. The options are Enable and Disable.
*If Intel® VMD for Volume Management Device for PStack0 is set to Enable, the fol-
lowing item will display.
CPU2 Slot2 PCI-E 3.0 x16 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specifi ed by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specifi ed by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
*If Intel® VMD for Volume Management Device for PStack1 is set to Enable, the fol-
lowing item will display.
CPU2 Slot5 PCI-E 3.0 x16 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specifi ed by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specifi ed by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
*If Intel® VMD for Volume Management Device for PStack2 is set to Enable, the fol-
lowing item will display.
CPU2 Slot4 PCI-E 3.0 x16 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specifi ed by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specifi ed by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.