3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X11DPU motherboard.
About This Motherboard
The Super X11DPU motherboard supports dual Intel® Xeon® scalable processors (in Socket
P). With the Intel® C621 chipset built-in, this motherboard supports RDIMM/LRDIMM/
NVDIMM DDR4 ECC memory of up to 2666 MT/s in 24 slots with four NVMe slots onboard.
The X11DPU provides maximum performance, system cooling, and PCI-E capacity, and is
ideal for WIO server platforms. Please note that this motherboard is intended to be installed
and serviced by professional technicians only. For processor/memory updates, please refer
to our website at http://www.supermicro.com/products/.
Manual organization
Chapter 1 describes the features, specications and performance of the motherboard, and
provides detailed information on the Intel® C621 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when installing the
processor, memory modules, and other hardware components into the system.
If you encounter any problems, see Chapter 3, which describes troubleshooting procedures
for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information on running
the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software program installation instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Appendix D lists standardized warning statements in various languages.
To Next Page
Loading...
Need help?
General
