Supermicro X11DPU - Connectors

49
Chapter 2: Installation
PSU2
PSU1
X11DPU
DESIGNED IN USA
BAR CODE
IPMI CODE
CPU2
CPU1
BIOS
LICENSE
COM1
LAN
CTRL
LED_P1_D2 LED_P1_D1 LED_P1_E2 LED_P1_E1 LED_P1_F2
LED_P1_F1
LED_P1_A2 LED_P1_A1 LED_P1_C2 LED_P1_B1
LED_P1_B2
LED_P1_C1
LED_P2_F2 LED_P2_F1 LED_P2_E2
LED_P2_E1
LED_P2_D2 LED_P2_D1
LED_P2_C2 LED_P2_C1 LED_P2_B2 LED_P2_B1 LED_P2_A2 LED_P2_A1
JRK1
S-UM12
JVGA2
BT1
JBT1
JL1
JUIDB2
JF1
JPG1
JVRM1
JWD1
FAN8
FAN7
FAN6
FAN5
FAN4
FAN3
FAN2
FAN1
JIPMB1
JNVI2C1
JNVI2C2
SP1
JSD1JSD2
T-SGPIO3
LED1
LEDM1
LEDPWR
JVRM2
JTPM1
SXB3B
SXB1B
SXB2
FAIL
LED UID NIC
2 1
NIC
LED HDD PWR
LED
X NMI
PWR
ON
JF1
RST
PS
P2_NVMe1
P2_NVMe0
P2-DIMMF2
P2-DIMMF1
P2-DIMME1 P2-DIMME2
SXB1A
CPU2_PORT3A
CPU2_PORT2C CPU2_PORT2A
SXB1C
P2-DIMMD2 P2-DIMMD1
CPU2_PORT1A
PCH_PORT1 CPU2_DMI
USB3/4 (3.0)
S-SATA0~3
S-SATA4
P2-DIMMA2
S-SATA5
P2-DIMMA1
UID
P2-DIMMB2 P2-DIMMB1 P2-DIMMC2
I-SATA0~3
P2-DIMMC1
I-SATA4~7
GPU PWR2
USB2 (3.0)
P1-DIMMF2
SXB3C
P1-DIMMF1
CPU1_PORT1A
SXB3A
CPU1_PORT3A
CPU1_PORT3C CPU1_PORT2A
CPU1_PORT2C
P1-DIMMD1 P1-DIMME1 P1-DIMME2 P1-DIMMD2
P1-DIMMA2 P1-DIMMA1
P1-DIMMC1 P1-DIMMC2 P1-DIMMB2 P1-DIMMB1
P1_NVMe0 P1_NVMe1
BP PWR4
VGA
IPMI_LAN
USB0/1 (3.0)
BMC
JSDCARD1
PCH
GPU PWR3
GPU PWR4
GPU PWR1
BP PWR2 BP PWR1
BP PWR3
CPU2_PORT3C
JPB1
REV:1.10
JHFI2
JHFI1
2.7 Connectors
Power Connections
SMCI-Propietary Main Power Supply Units
Two SMCI-proprietary main power supply units are located at PSU1 & PSU2. Connect
appropriate power supply units to these two headers to provide adequate power to your
system.
1. PSU1 (Required)
2. PSU2 (Required)
3. BP PWR1 (Required)
4. BP PWR2 (Required)
5. BP PWR3 (Required)
6. BP PWR4 (Required)
7. GPU PWR1 (Required)
8. GPU PWR2 (Required)
9. GPU PWR3 (Required)
10. GPU PWR4 (Required)
1
8-pin GPU Power
Pin Denitions
Pin# Denition
1 - 3 +12V
4 - 8 Ground
Backplane Power Connectors & GPU Power Connectors
In addition to the two SMCI-proprietary main power supply units located at PSU1/PSU2, eight
8-pin power connectors are also located on the motherboard to supply power to onboard
devices. GPU Power Connectors 1-4 are used for GPU devices, while BP PWR 1-4 are used
for backplane devices. Connect these connectors to your power supply to provide adequate
power to your onboard devices.
Warning: To provide adequate power to your system and to avoid damaging the power sup-
ply or the motherboard, be sure to connect all power connectors mentioned above to the
power supply. Failure in doing so may void the manufacturer warranty on your power supply
and motherboard.
8-pin Backplane Power
Pin Denitions
Pin# Denition
1 - 4 Ground
5 - 6 +12V
7 - 8 +5V
7
6
5
4
3
2
8
9
10