Supermicro X11DPU - Pch Sata Configuration

Chapter 4: BIOS
95
• ME Firmware Status #1
• ME Firmware Status #2
• Current State
• Error Code
PCH SATA Conguration
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel® PCH chip.
The options are Disable and Enable.
Congure SATA as
Select AHCI to congure a SATA drive specied by the user as an AHCI drive. Select RAID
to congure a SATA drive specied by the user as a RAID drive. The options are AHCI and
RAID.
SATA HDD Unlock
Select Enable to unlock the HDD password. The options are Disable and Enable.
Aggressive Link Power Management
When this item is set to Enable, the SATA AHCI controller manages the power usage of the
SATA link. The controller will put the link to a low power state when the I/O is inactive for an
extended period of time, and the power state will return to normal when the I/O becomes
active. The options are Disable and Enable.
*If the item above "Congure SATA as" is set to AHCI, the following items will be
displayed:
SATA Port 0~ Port 7
This item displays the information detected on the installed SATA drive on the particular SATA
port.
• Model number of drive and capacity
• Software Preserve Support
Hot Plug (SATA Port 0~ Port 7)
Select Enabled to enable a SATA port specied by the user. The options are Disable and
Enable.