Supermicro X11DPU - Page 86

Super X11DPU User's Manual
86
P1_NVMe1
Link Speed
Use this feature to select the link speed for the PCIe port. The options are Auto,
Gen 1 (2.5 GT/s), Gen 2 (5 GT/s), and Gen 3 (8 GT/s).
PCI-E Port Link Status
PCI-E Port Link Max
PCI-E Port Link Speed
PCI-E Port Max Payload Size
Select Auto for the system BIOS to automatically set the maximum payload value
for a PCI-E device to enhance system performance. The options are 128B, 256B,
and Auto.
AOC-URN6-i2XT NVME2 (Available when the device is detected by
the system)
Link Speed
This feature allows the user to select PCI-E support for the device installed in the
system. The options are Auto, Gen 1 (2.5 GT/s), Gen 2 (5 GT/s), and Gen 3 (8 GT/s).
PCI-E Port Link Status
PCI-E Port Link Max
PCI-E Port Link Speed
PCI-E Port Max Payload Size
Select Auto for the system BIOS to automatically set the maximum payload value
for a PCI-E device to enhance system performance. The options are 128B, 256B,
and Auto.
AOC-URN6-i2XT NVME3 (Available when the device is detected by
the system)
Link Speed
This feature allows the user to select PCI-E support for the device installed in the
system. The options are Auto, Gen 1 (2.5 GT/s), Gen 2 (5 GT/s), and Gen 3 (8 GT/s).