3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X11SSL-CF/-nF motherboard.
About This Motherboard
The Super X11SSL-CF/-nF motherboard supports an Intel Xeon E3-1200 v6/v5, 7th/6th Gen
Core i3, Pentium, and Celeron series processor in an LGA 1151 (H4) socket. With support
of the Intel C232 chipset, DDR4 2400MHz memory, SATA 3.0, SAS 3.0 (12 Gb/ps)*, NVMe
SSDs**, and Trusted Platform Module (TPM), this motherboard offers a cost-optimized storage
solution in the Micro-ATX form factor. Please also note that this motherboard is intended to
be installed and serviced by professional technicians only. For processor/memory updates,
please refer to our website at http://www.supermicro.com/products/.
*SAS 3.0 is available on the -CF model only.
**NVMe is supported by the -nF model only.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.
To Next Page
Loading...
Need help?
General
