X11SSL-CF/-nF User Manual
100
The following IPMI information will be displayed:
• BMC Firmware Revision
• IPMI STATUS
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging support at bootup. The options are Enabled
and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.
When SEL is Full
This feature allows the user to determine what the AMI BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the system
event log is full. The options are Do Nothing and Erase Immediately.
Note: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
4.5 IPMI
This submenu allows the user to congure Intelligent Platform Management Interface (IPMI)
settings.
To Next Page
Loading...
Need help?
General
