Supermicro X12STL-IF - Network Configuration Settings

Super X12STL-IF User's Manual
84
CPU SLOT7 PCI-E 4.0 X16
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled and Legacy (if the Boot Mode Select feature under the Boot tab
is set to Legacy), Disabled and EFI (if the Boot Mode Select feature under the Boot tab is
set to UEFI), and Disabled, Legacy, and EFI (if the Boot Mode Select feature under the Boot
tab is set to Dual).
M.2-H
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled and Legacy (if the Boot Mode Select feature under the Boot tab
is set to Legacy), Disabled and EFI (if the Boot Mode Select feature under the Boot tab is
set to UEFI), and Disabled, Legacy, and EFI (if the Boot Mode Select feature under the Boot
tab is set to Dual).
Onboard LAN1 Option ROM
Use this feature to select a desired rmware function to be loaded for onboard LAN1. The
options are Disabled and Legacy (if the Boot Mode Select feature under the Boot tab is set
to Legacy), Disabled and EFI (if the Boot Mode Select feature under the Boot tab is set to
UEFI), and Disabled, Legacy, and EFI (if the Boot Mode Select feature under the Boot tab
is set to Dual).
Onboard LAN2 Option ROM
Use this feature to select a desired rmware function to be loaded for onboard LAN2. The
options are Disabled and Legacy (if the Boot Mode Select feature under the Boot tab is set
to Legacy), Disabled and EFI (if the Boot Mode Select feature under the Boot tab is set to
UEFI), and Disabled, Legacy, and EFI (if the Boot Mode Select feature under the Boot tab
is set to Dual).
Network Conguration
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unied Extensible
Firmware Interface (UEFI) for network stack support. The options are Disabled and Enabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.