Chapter 4: BIOS
85
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media is checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
MAC:xxxxxxxxxxxx-IPv4 Network Conguration
MAC:xxxxxxxxxxxx-IPv4 Network Conguration
Congured
Select Enabled to manually enter network addresses. The options are Disabled and
Enabled.
*If the feature above is set to Enabled, the next ve features are available for
conguration:
Enable DHCP
Use this feature to enable Dynamic Host Conguration Protocol. If this feature is enabled,
then you don't have the option of manually entering the network addresses. The options
are Disabled and Enabled.
Local IP Address
Use this feature to enter the local IP address.
Local Netmask
Use this feature to enter the local Netmask address.
Local Gateway
Use this feature to enter the local Gateway address.
Local DNS Servers
Use this feature to enter the local DNS Server address.
Save Changes and Exit
Use this feature to save the changes and exit from the menu.
MAC:xxxxxxxxxxxx-IPv6 Network Conguration
MAC:xxxxxxxxxxxx-IPv6 Network Conguration
To Next Page
Loading...
Need help?
General
