Supermicro X12STL-IF User Manual

Super X12STL-IF User's Manual
86
Enter Conguration Menu
Interface Name
Interface Type
MAC address
Host address
Route Table
Gateway addresses
DNS addresses
Interface ID
This feature displays the interface ID for the network device.
DAD Transmit Count
Use this feature to set the Duplicate Address Detection (DAD) value. The 0 value means
no DAD is performed. The default value is 1.
Policy
Use this feature to select the automatic or manual policy. The options are automatic
and manual.
Save Changes and Exit
Use this feature to save the changes and exit from the menu.
HTTP Boot Conguration
HTTP Boot Conguration
HTTP Boot Policy
Use this feature to select the boot policy. The options are Apply to all LANs, Apply to each
LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Enable this feature for HTTPS boot to check the hostname of the TLS certicates to see if it
matches the hostname provided by the remote server. The options are Enabled and Disabled.
Priority of HTTP Boot:
Instance of Priority 1:
Use this feature to set the rank target port. The default value is 1.

Supermicro X12STL-IF Specifications

General

Brand	Supermicro
Model	X12STL-IF
Category	Motherboard
Language	English