Supermicro X12STL-IF - Page 87

Chapter 4: BIOS
87
Select IPv4 or IPv6
Use this feature to select which LAN port to boot from. The options are IPv4 and IPv6.
Boot Description
Highlight the feature and press enter to create a boot description. The description cannot be
more than 75 characters.
Boot URI
Highlight the feature and press enter to create a boot URI.
Instance of Priority 2
Use this feature to set the rank target port. The default value is 0.
Trusted Computing
The motherboard supports TPM 2.0. The following Trusted Platform Module (TPM) information
will display if a TPM 2.0 module is detected:
• Vendor Name
• Firmware Version
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM (Trusted Platform Module) support to enhance data
integrity and network security. Please reboot the system for a change on this setting to take
e󰀨ect. The options are Disable and Enable.
• Active PCR Bank
• Available PCR banks
• SHA256 PCR Bank
*If the feature above is set to Enable, "SHA-1 PCR Bank" and "SHA256 PCR Bank" will
become available for conguration:
SHA-1 PCR Bank
Use this feature to disable or enable the SHA-1 Platform Conguration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
SHA256 PCR Bank
Use this feature to disable or enable the SHA256 Platform Conguration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.