Supermicro X12STL-IF - Page 89

Chapter 4: BIOS
89
USB Conguration
USB Conguration
USB Module Version: 21
USB Controllers: 2 XHCIs
USB Devices:
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-o󰀨
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-o󰀨. The XHCI ownership change should be claimed by the
XHCI driver. The settings are Enabled and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and Enabled.
Tls Auth Conguration
This submenu allows you to congure Transport Layer Security (TLS) settings.
Server CA Conguration
Enroll Certication
Enroll Certication Using File
Use this feature to enroll certication from a le.
Cert GUID
Use this feature to input the certication GUID.
Commit Changes and Exit
Use this feature to save all changes and exit TLS settings.
Discard Changes and Exit
Use this feature to discard all changes and exit TLS settings.