Supermicro X12STL-IF User Manual

Super X12STL-IF User's Manual
90
Delete Certication
Use this feature to delete certication.
Intel(R) I210 Gigabit Network Connection - xx:xx:xx:xx:xx:xx
Intel(R) I210 Gigabit Network Connection - xx:xx:xx:xx:xx:xx
NIC Conguration
Link Speed
Use this feature to specify the port speed used for the selected boot protocol. The options
are Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
Select Enabled for wake on LAN support, which allows the system to wake up when an
onboard LAN device receives an incoming signal. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. Use the
keyboard to select a value.
UEFI Driver
Adapter PBA
Device Name
Chip Type
PCI Device ID
PCI Address
Link Status
MAC Address
Virtual MAC Address
Driver Health
This feature provides the health status for the network drivers and controllers.

Supermicro X12STL-IF Specifications

General

Brand	Supermicro
Model	X12STL-IF
Category	Motherboard
Language	English