Supermicro X13SEI-TF - Page 101

Chapter 4: UEFI BIOS
101
HTTPBootConguration
HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Use this feature to select whether HTTPS Boot checks the hostname of TLS certicates
matches the hostname provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
Priority of HTTP Boot:
Instance of Priority 1:
This feature sets the rank target port. The default value is 1.
Select IPv4 or IPv6
This feature species which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description that cannot be longer than 75 characters. Enter
a boot description; otherwise, the boot option for the URI cannot be created.
Boot URI
Enter a Boot Uniform Research Identier (URI) with 128 characters or shorter. This Boot URI
determines how IPv4 Boot Option and IPv6 Boot Option will be created. This feature is only
supported on Dual or EFI Boot Mode.
Instance of Priority 2:
This feature sets the rank target port. The default setting is 0.
SupermicroKMSServerConguration
Supermicro KMS Server IP address
Use this feature to enter the SMCI Key Management Service (KMS) server IPv4 address in
dotted-decimal notation (e.g., 255.255.255.255).
Second Supermicro KMS Server IP address
Use this feature to enter the second SMCI KMS server IPv4 address in dotted-decimal
notation (e.g., 255.255.255.255).
Supermicro KMS TCP Port number
Use this feature to enter the SMCI KMS TCP port number. The valid range is 100–9999. The
default setting is 5696.