Supermicro X13SEI-TF - Page 105

Chapter 4: UEFI BIOS
105
NICConguration
Link Speed
Wake On LAN
If this feature is set to Enabled, the LAN port you specied will be enabled when the system
is powered on. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
The following information is displayed:
• UEFI Driver
• Adapter PBA
• Device Name
• Chip Type
• PCI Device ID
• PCI Address
• Link Status
• MAC Address
• Virtual MAC Address
TLSAuthenticateConguration
This submenu allows you to congure Transport Layer Security (TLS) settings.
ServerCAConguration
This feature allows you to congure the client certicate that is to be used by the server.
EnrollCertication
This feature allows you to enroll the certicate in the system.
EnrollCerticationUsingFile
This feature allows you to enroll the security certicate in the system by using a le.