EasyManuals Logo

Supero SUPER 370SBA User's And Bios Manual

Default Icon
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
SUPER 370SBA/370SBM/370SLA/370SLM User’s Manual
5-16
PCI Slot1 IRQ Priority
PCI Slot2 IRQ Priority
PCI Slot3 IRQ Priority
PCI Slot4 IRQ Priority
These options specify the IRQ priority for PCI devices installed in the PCI
expansion slots. The settings are
Auto, (IRQ) 3, 4, 5, 7, 9, 10, 11, 12, 14,
or
15, in priority order
.
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
These DMA channels control the data transfers between the I/O devices
and the system memory. The chipset allows the BIOS to choose which
channels to do the job. The settings are
PnP
or
ISA/EISA.
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ12
IRQ14
IRQ15
These options specify which bus the specified IRQ line is used on and
allow you to reserve IRQs for legacy ISA adapter cards. If more IRQs must
be removed from the pool, the end user can use these options to reserve
the IRQ by assigning an
ISA/EISA
setting to it. Onboard I/O is configured
by AMIBIOS. All IRQs used by onboard I/O are configured as PCI/PnP.
IRQ14 and 15 will not be available if the onboard PCI IDE is enabled. If all
IRQs are set to
ISA/EISA
and IRQ14 and 15 are allocated to the onboard
PCI IDE, IRQ 9 will still be available for PCI and PnP devices. This is
because at least one IRQ must be available for PCI and PnP devices. The
settings are
PCI/PnP
or
ISA/EISA.

Table of Contents

Other manuals for Supero SUPER 370SBA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supero SUPER 370SBA and is the answer not in the manual?

Supero SUPER 370SBA Specifications

General IconGeneral
BrandSupero
ModelSUPER 370SBA
CategoryMotherboard
LanguageEnglish

Related product manuals