Supero X8DAi - Install Windows OS for Non-RAID System

B-2
X8DA3/X8DAi User's Manual
B-2 Installing the Windows OS for a Non-RAID System
Insert Microsoft's Windows OS Setup CD in the CD Driver, and the system 1.
will start booting up from CD.
Continue with the OS installation. The Windows OS Setup screen will display.2.
From the Windows OS Setup screen, press the <Enter> key. The OS Setup 3.
will automatically load all device fi les and then continue with the Windows OS
installation.
After the Windows OS Installation is completed, the system will automatically 4.
reboot.
Insert the Supermicro Setup CD that came with your motherboard into the CD 5.
Drive during system boot, and the main screen will display.