Suunto D3 - 3.3.3. BASIC DIVE DATA

30
3.3.3. BASIC DIVE DATA
The dive computer will remain in the Surface mode
at depths less than 1.2 m [4 feet]. At depths greater
than 1.2 m the instrument will go into the Diving
mode (Fig. 3.17.).
During a dive, the following information will be dis-
played (Fig. 3.18.):
• in the upper window, your present depth in
meters [ft].
• in the center window, a dive timer which can
be reset by the diver.
• the maximum depth during this dive in me-
ters [ft], indicated as MAX or the tempera-
ture in °C [°F] in the lower left corner.
• the elapsed dive time in minutes, indicated
as DIVE TIME or the current time, indi-
cated as TIME in the lower right corner.
F
R
E
E
A
C
S
DIVE TIME
m
°C
Fig. 3.18. Diving display.
Present depth is 10.2m. Dive
timer shows 27 minutes and 18
seconds. Temperature and dive
time are shown in the bottom
window.
F
R
E
E
A
C
S
m
m
DIVE TIMEMAX
Fig. 3.17. Dive has just begun.