Suunto D3 - Page 45

43
lected dive mode (GAUGE or FREE) is dis played
(Fig. 4.11.)
While the enable/disable status [On/OFF] is selected
(blinking) press + or - to change the status.
3. Press S to change the selection in the following
sequence:
-
>On/OFF status
-
> GAUGE/FREE Mode
When the GAUGE/FREE dive mode is selected
(blinking) press + or - to change the mode to
GAUGE.
4. After setting the GAUGE Mode, the Gauge record-
ing interval can be set by pressing the S-button once.
The interval can be set for 10, 20, 30 or 60 seconds.
5. After you have set the GAUGE Mode, press the
M button to save the settings and to return to the
Setting Mode [SET].
A
C
S
Fig. 4.12. Gauge recording
interval selected.