EasyManua.ls Logo

Suunto D9 - Ascent Rate Indicator

Suunto D9
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE
Filling your BC affects the air time calculation due to the temporary
increase in air consumption.
NOTE
A change of temperature will affect the cylinder pressure and
consequently the air time calculation.
Low Air Pressure Warnings
The dive computer will warn you with three audible double beeps and a blinking
pressure display when the cylinder pressure reaches 50 bar/725 psi.
TANK PRESSURE HAS DROPPED BELOW 50 BAR
AND THE REMAINING AIR TIME IS 4 MINUTES.
THE DISPLAY BLINKS AND THERE IS AN AUDIBLE ALARM.
Three double beeps are also heard when the cylinder pressure goes down to the user-
selected alarm pressure and when the remaining air time reaches zero.
6.1.4. Ascent rate indicator
The ascent rate is shown graphically along the right side of the display. When the
maximum allowed ascent rate is exceeded, the fifth SLOW warning segment and the
STOP sign appear and the depth reading starts to blink, indicating that the maximum
ascent rate has been exceeded continuously or that the current ascent rate is
significantly above the allowed rate.
68

Table of Contents

Other manuals for Suunto D9

Related product manuals