6.2.2. Oxygen displays
When NITROX mode is activated, the display will show the information in the figure
below. In NITROX mode, the maximum operational depth is calculated based on set
O
2
% and PO
2
values.
If set to NITROX mode, the Suunto D9 will additionally show on the alternative display:
•
the oxygen percentage, labeled O
2
%
•
the set oxygen partial pressure limit, labeled PO
2
•
the current oxygen toxicity exposure, labeled OLF
•
maximum depth
•
current time
•
water temperature
•
dive time
77