•
the oxygen partial pressure labeled PO
2
•
the current oxygen toxicity exposure labeled OLF
7.1.2. Dive numbering
Several repetitive dives are considered to belong to the same repetitive dive series
when the dive computer has not counted the no-fly time to zero. Within each series,
the dives are given individual numbers. The first dive of the series will be numbered
as DIVE 1, the second as DIVE 2, the third as DIVE 3, etc.
If you start a new dive with less than 5 minutes of surface interval time, the dive
computer interprets this as a continuation of the previous dive and the dives are
considered to be the same. The diving display will return, the dive number will remain
unchanged, and the dive time will begin where it left off. After 5 minutes on the surface,
subsequent dives are, by definition, repetitive. The dive counter displayed in the
Planning mode will increment to the next number if another dive is made.
Table 7.1. Alarms
IndicationSymbol on display
Diver Attention Symbol - Attenuated RGBM model set
Diver Attention Symbol - Extend Surface Interval
Violated Decompression Ceiling
Do Not Fly Symbol
82
To Next Page
Loading...
