Suunto ESSENTIAL - Button Tone; Tone Guides

•
TONE GUIDE: on/off
•
BACKLIGHT: light button/any button
•
LANGUAGE: English, French, Spanish, German
To enter GENERAL in MENU:
1.
Enter MENU by keeping [Mode] pressed in the TIME , ALTI &
BARO or COMPASS mode.
2.
Scroll down to GENERAL using [- Light].
3. Enter with [Mode].
5.2.1 Button tone
In BUTTON TONE you turn the button tone on or off. A button tone
is emitted every time a button is pressed, confirming an action.
1.
In GENERAL, select BUTTON TONE.
2. Switch the button tone on or off with [+] and [- Light].
5.2.2 Tone guides
In TONE GUIDE you turn the tone guides on or off. You will hear
tone guides when:
•
You change a setting value
•
You set the altitude reference value
•
You start or stop the log recorder
•
You mark an altitude point while you are recording logs
•
You start or stop the stopwatch
•
The device switches between the ALTIMETER and BAROMETER
profile when you are using the AUTOMATIC profile.
To turn tone guides on or off:
1.
In GENERAL, select TONE GUIDES.
14