NOTE: An estimation of how much time you can record is
shown in the lower part of the display when you browse between
the recording rates. The actual recording durations may vary slightly
depending on your activity during the recording period.
You can access your history of recorded logs, including log details,
from LOGBOOK in MENU (see
9.2 Viewing and locking logs
).
TIP: When you have stopped the log recorder, you can enter the
logbook and view your current recordings before you reset the
recorder.
Possible real life situation: Recording altitude
You’re going on another mountain hike. This time you want to
record how much you ascend and descend so as to compare the
figures with previous hikes. You set your Suunto Essential to the
ALTIMETER
profile and start the log recorder when you begin the
hike. After the hike you stop your log recorder and reset it . Now
you can compare it with your previous logs.
7.6 Using barometer profile
The BAROMETER profile shows the current sea level air pressure.
This is based on the reference values given and the constantly
measured absolute air pressure. Changes in sea level air pressure are
presented graphically in the middle of the display. The display
34
To Next Page
Loading...
