Suunto ESSENTIAL - Backlight; Language

2. Switch the tone guides on or off with [+] and [- Light].
5.2.3 Backlight
In BACKLIGHT you switch between two different light features: any
button and light button.
To set the backlight to normal or night use:
1.
In GENERAL, select BACKLIGHT.
2.
Switch the backlight between LIGHT BUTTON and ANY BUTTON
with [+] and [- Light].
When LIGHT BUTTON has been selected, you can activate the
backlight with [- Light]. The backlight is turned off automatically
after 5 seconds. If you want to see the backlight when you are in
the MENU, you need to activate it in the TIME, ALTI & BARO or
COMPASS
mode before entering the
MENU
. The backlight will then
be activated until you exit
MENU
.
When
ANY BUTTON
has been selected, the backlight is activated
every time you push a button.
5.2.4 Language
In
LANGUAGE
you choose the language of your Suunto Essential
user interface (English, German, French or Spanish).
To choose a language:
1.
In
GENERAL
, select
LANGUAGE
.
2. Select a language from the list with [+] and [- Light].
15