Suzuki DF100C - Meter (Option) Multi-Function Gauge

17
NOTICE
Damage can occur if you use the tilt lock lever
other than when the boat is moored or is oth-
erwise stationary.
The tilt lock lever relieves pressure from the
power trim and tilt and should only be used
when the boat is stationary. Do not use the tilt
lock lever when trailering your boat and
motor. Refer to the TRAILERING section of
this manual.
METER (OPTION)
MULTI-FUNCTION GAUGE
This gauge is multifunctional gauge that dis-
plays the various information through digital
communication with the engine.
Information displayed are engine speed, shift
position, fuel level, fuel consumption, etc.
NOTE:
There is information that cannot be displayed
depending on the model and equipment.
NOTE:
Consult your authorized Suzuki marine dealer
for setting up the multi-function gauge.
NOTE:
For details the proper handling of the multi-
function gauge, refer to “OPERATION
INSTRUCTION MANUAL” packed in the gauge.
NOTE:
The navigation data on this gauge should be
used only for your reference. When exact navi-
gation information is required, use nautical
charts and/or accurate navigation instruments
together with the multi-function gauge.