48
OPERATION
ENGINE SWITCH (OPTION)
Use this switch if equipped with Keyless Start
System.
• Quickly press the engine switch to start and
stop engine. (The buzzer sounds once.)
• Press and hold the engine switch for at least
2 seconds to set the Keyless Start System
ON state and OFF state. (The buzzer sounds
once.)
IGNITION SWITCH (OPTION)
Use this switch if not equipped with Keyless
Start System.
• Turn until the ignition key is in the “ON” posi-
tion.
• Turning the ignition key to the “START” posi-
tion automatically starts engine.
OFF
ON
START
BEFORE ATTEMPTING TO START THE
ENGINE
1. The motor has been lowered into the water.
2. The fuel hose is securely connected to the
fuel tank and the motor.
3. Direct the pilot water hole to the position you
intend.
4. Ensure that the boat fuel tank is correctly
vented and that any in-line filters are free of
dirt etc. If fuel tank filler cap has a manual
vent, be sure that it is fully open.
Fuel hose
To Next Page
Loading...
