35
GAUGE COMMUNICATION CAUTION
SYSTEM
This system activates when there is a commu-
nication error of the gauge.
If this system activates, the “Check Gauge C.”
is indicated on the screen.
The “Check Gauge C.” indication clears when
any of the buttons are pressed on the gauge.
TROLL CONDITION CAUTION SYSTEM
(IF EQUIPPED WITH MULTI FUNCTION
GAUGE)
This system activates when the mode cannot
be transferred to the TROLL Mode.
If this system activates, the “Check Troll Condi-
tion” is displayed on screen.
NOTICE
If this system activates for no apparent rea-
son, there may be a problem with the system.
Consult your authorized Suzuki marine dealer.
Make sure that the remote control lever has
been shifted into forward or reverse and the
engine throttle has been fully closed.
Refer to the Setting the Troll Mode section.
The “Check Troll Condition” indication clears
when any of the button is pressed in the gauge.
TROLL SYSTEM CAUTION SYSTEM
(IF EQUIPPED WITH MULTI FUNCTION
GAUGE)
The current ECM of your outboard motor does
not applicable to the troll mode system.
If this system activates, the “Check Troll Sys-
tem” is displayed on screen.
The “Check Troll System” indication clears
when any of the button is pressed in the gauge.
If this system activates, consult your authorized
Suzuki Maine Dealer.
To Next Page
Loading...
