64
CANCELING THE TILT UPPER POSITION
LIMIT SETTING
1. If equipped with Keyless Start System:
Press and hold the engine switch 1 for more
than two seconds to turn on the power.
If not equipped with Keyless Start System:
Turn the ignition key to the “ON” position.
2. Pull out the emergency stop switch lock
plate.
3. Make sure that remote control handle is in
“NEUTRAL”.
4. Using the throttle only function of the remote
control box, move the lever until the caution
buzzer sounds one time.
5. Press the “UP” side of the PTT switch for
three seconds and the buzzer will sound
twice briefly indicating the setting has been
canceled.
6. Return the throttle to the fully closed posi-
tion.
SETTING THE TILT UPPER POSITION
LIMIT
V
WARNING
Setting of the tilt upper limit position will not
prevent the outboard motor from tilting fully
up and contacting the motor well if the
motor’s lower unit hits an object at high
speed. Such tilting could damage your motor
and boat and injure the boat occupants.
Keep all occupants away from the motor when
operating at high speed.
Free accelerator
button
UP
PTT switch
To Next Page
Loading...
