EasyManua.ls Logo

Suzuki DF250S - Motor Removal and Transporting; Motor Removal Recommendations; Motor Transporting Methods

Suzuki DF250S
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
NOTE:
Top mount type
Not equipped with a lock-out lever. Exercise
care when selecting neutral position.
Speed control
To increase speed after you have shifted into
gear, continue moving the control handle for-
ward or rearward.
WARNING
Since the same handle is used for shift-
ing and speed control, you must be care-
ful not to move the control handle too far
forward or rearward when shifting. If you
move the handle past the detent, throttle
will be engaged and the boat can start
moving suddenly.
Top mount
type
NEUTRAL
FORWARD
REVERSE
35˚ 35˚
STOPPING THE ENGINE
To stop the engine, shift into “NEUTRAL” and
turn the ignition key to the “OFF” position.
Always leave the ignition key in the “OFF” posi-
tion when the motor is not running, or the bat-
tery can discharge.
NOTE:
To make sure that the emergency stop switch
operates properly, stop the engine occasionally
by pulling out the lock plate, while operating the
engine at idling speed.
WARNING
To prevent unauthorized use of your boat,
be sure to remove the key and emergency
stop switch lock plate when the boat is
unattended.
Side mount
type
Top mount
type

Table of Contents

Related product manuals