Why is the propeller not rotating on my Suzuki Outboard Motor?
If the propeller on your Suzuki Outboard Motor isn't rotating, it could be because: * The propeller bush is worn or damaged. * The drive shaft is damaged. * The propeller shaft is damaged.
General| Maximum Output | 257.4kW (350PS) |
|---|---|
| Fuel Delivery System | Electronic Fuel Injection |
| Starting System | Electric |
| Steering | Remote |
| Gear Ratio | 2.29:1 |
| Lubrication System | Wet sump |
| Engine Mounting | Shear Mount |
| Displacement | 4, 390 cm3 (267.9 cu. in.) |
| Bore x Stroke | 98 x 97 mm |
| Ignition System | Fully Transistorized |
| Shaft Length | X: 635mm (25 in.), XX: 762mm (30 in.) |
| Oil Capacity | 8.0 L (8.5 US qt.) |
| Alternator | 12V 54A |
| Weight | 330 kg (727 lbs) |
| Exhaust | Through Propeller Hub |
| Engine Type | 4-stroke, DOHC, V6 |
| Recommended Fuel | Unleaded Gasoline (87 Octane Minimum) |
Explains the meaning of WARNING, CAUTION, NOTICE, and NOTE used in the manual.
Provides essential safety guidelines for performing maintenance and highlights potential hazards.
Describes general safety measures, hazard definitions, and critical injury warnings for servicing.
Details precautions against damage, environmental care, and specialized component handling.
Explains manual symbols, abbreviations, and wire color coding for clarity.
Covers motor identification, fluid recommendations, and initial engine break-in procedures.
Guides on choosing propellers, specifies battery needs, and describes powerhead rotation design.
Details general specifications, performance data, and key component measurements.
Lists critical service data for powerhead, valves, cylinder, piston, and rings.
Provides crucial torque values for various fasteners ensuring proper assembly.
Lists essential tools and recommended service materials for maintenance tasks.
To Next Page
