6-55
CLUTCH LEVER FITTING
Align the dot mark on the handlebar
with the mating surface of the lever
holder A.
CATALYTIC CONVERTER
The purpose of the catalytic converter
is to minimize the amount of harmful
pollutants in your motorcycle’s
exhaust. Use of leaded fuel in motor-
cycles equipped with catalytic con-
verters is prohibited because lead
deactivates the pollutant-reducing
components of the catalyst system.
The converter is designed to last the
life of the motorcycle under normal
usage and when unleaded fuel is
used. Not special maintenance is
required on the converter. However, it
is very important to keep the engine
properly tuned. Engine misfiring,
which can result from an improperly
tuned engine, may cause overheat-
ing of the catalyst. This may result in
permanent heat damage to the cata-
lyst and other motorcycle compo-
nents.
To Next Page
Loading...
