2-6
IMMOBILIZER INDICATOR
(if equipped)
The immobilizer indicator blinks 2
times when the ignition switch is
turned on. Then indicator comes on 2
seconds and goes off.
Immobilizer system is designed to
help prevent motorcycle theft by elec-
tronically disabling the engine starting
system. The engine can be started
only with your original keys which
have an electronic identification code
programmed into it. The key commu-
nicates the identification code to the
ECM when the key is turned to “ON”
position.
NOTE:
• It is impossible to start the engine
when the indicator remains blink-
ing.
• If the indicator remains blinking, it
means immobilizer system com-
munication error between key and
ECM or use of wrong key. Turn off
the ignition switch and then turn
on to communicate immobilizer
system properly.
• Two ignition keys are originally
registered to the immobilizer sys-
tem. It is possible to add two more
keys. The indicator blinks num-
bers of registered key when the
ignition switch is turned on.
To Next Page
Loading...
