2-19
Instrument panel light brightness
Set the meter to instrument panel
light brightness, then press and hold
the ADJUST button 1 for 2 seconds
until “
” mark indicators blink. Push-
ing the ADJUST button 1 will change
the instrument panel light brightness
in 6 steps. The brightness indicator
indicates brightness from “
” (min) to
“
” (max). Press and hold
the ADJUST button 1 for 2 seconds
until return to mode.
FUEL METER “” F
The fuel meter indicates the amount
of fuel remaining in the fuel tank. The
fuel meter displays all 5 segments
when the fuel tank is full. The mark
blinks when the fuel level drops below
4.5 L (4.8/4.0 US/Imp. qt). The mark
and segment blink when the fuel
drops below 2.5 L (2.6/2.2 US/Imp.
qt).
NOTE: The fuel meter will not indicate
correctly when the motorcycle is
placed on the side stand. Turn the
ignition switch to the “ON” position
when the motorcycle is held upright.
Fuel tank
Approximately
2.5 L
Approximately
4.5 L
Full
Fuel gauge
Blink
mark
Blink Blink
To Next Page
Loading...
