5-7
How the ABS Works
ABS works by electronically control-
ling braking pressure. A computer
monitors wheel rotation speed. If the
computer detects that a braked wheel
has slowed suddenly, indicating a
skidding situation, the computer will
reduce braking pressure to prevent
that wheel from locking up. ABS
works automatically, so you do not
need any special braking technique.
Just apply the front and rear brakes,
as forcefully as necessary for the situ-
ation, without pumping either one. It is
normal for the brake lever/pedal to
pulsate while the ABS is operating.
Non-recommended tires can affect
wheel speed and may confuse the
computer.
ABS does not work at very low speed,
less than 8 km/h (5 mph), and does
not work with a discharged battery.
WARNING
Failure to use good judgment with
ABS can be hazardous. ABS can-
not make up for bad road condi-
tions, bad judgement, or improper
operation of the brakes.
Remember that ABS will not com-
pensate for poor judgment, incor-
rect braking techniques, or the
need to slow down over bad roads
or in poor weather conditions. Use
good judgment and do not ride
faster than conditions will safely
allow.
To Next Page
Loading...
