Suzuki GS500E - GS500 K1;K2 (01;02-Models) Service Data - Carburetor

GS500K1/K2 (’01/’02-MODELS) 18-7
CARBURETOR
ITEM
SPECIFICATION
E-02, 19, 24, 54 E-19 E-19 E-19
(GS500) (GS500-H) (GS500-U) (GS500-HU)
Carburetor type MIKUNI
←←←
BSR34SS
Bore size 34 mm ←←←
I.D. No. 01DE 01DF 01DG 01DK
Idle r/min.
1 200 ±100 r/min. ←←←
Float height 13.0 ± 1.0 mm ←←←
Main jet (M.J.) #115 #130 #115 #135
Jet needle (J.N.) 5DH41-2nd 5DH41-3rd 5DH41-2nd 5DH41-3rd
Needle jet (N.J.) P-5M ←←←
Throttle valve (Th.V.) #105
←←←
Pilot jet (P.J.) #17.5 ←←←
Pilot screw (P.S.) PRE-SET PRE-SET PRE-SET PRE-SET
(2¾ turns back) (2
5
/
8
turns back) (2 turns back) (2
5
/
8
turns back)
Throttle cable play 3 – 6 mm
←←←
(0.1 – 0.2 in)
CARBURETOR
ITEM
SPECIFICATION
E-03, 28 E-33
Carburetor type MIKUNI BST34SS ←
Bore size 34 mm ←
I.D. No. 01DH 01DJ
Idle r/min. 1 200 ± 100 r/min. ←
Float height 13.0 ± 1.0 mm ←
Main jet (M.J.) #
←
Jet needle (J.N.) 5DH42 ←
Needle jet (N.J.)
←
Throttle valve (Th.V.) #105 ←
Pilot jet (P.J.) #
←
Pilot screw (P.S.) PRE-SET (2½ turns back) ←
Throttle cable play 3 – 6 mm (0.1 – 0.2 in) ←