Suzuki GS500E - GS500 K3 (03-Model) Service Data - Carburetor

19-8 GS500K3 (’03-MODEL)
CARBURETOR
CARBURETOR
ITEM
SPECIFICATION
P-02, 09, 19, 24, 54
(GS500)
P-19
(GS500-H)
P-19
(GS500-U)
Carburetor type MIKUNI
BSR34SS
←←
Bore size 34 mm ←←
I.D. No. 01DE 01DF 01DG
Idle r/min. 1 200 ±100 r/min. ←←
Float height 13.0 ± 1.0 mm ←←
Main jet (M.J.) #115 #130 #115
Jet needle (J.N.) 5DH41-2nd 5DH41-3rd 5DH41-2nd
Needle jet (N.J.) P-5M ←←
Throttle valve (Th.V.) #105 ←←
Pilot jet (P.J.) #17.5 ←←
Pilot screw (P.S.) 2! turns back * 2! turns back 2 turns back
Throttle cable play 3 – 6 mm
(0.1 – 0.2 in)
←←
ITEM
SPECIFICATION
P-19
(GS500-HU)
P-28
Carburetor type ←←
Bore size ← 34 mm
I.D. No. 01DK 01DH
Idle r/min. ← 1 200 ± 100 r/min.
Float height ← 13.0 ± 1.0 mm
Main jet (M.J.) #135 #
Jet needle (J.N.) 5DH41-3rd 5DH42
Needle jet (N.J.) ←
Throttle valve (Th.V.) ← #105
Pilot jet (P.J.) ← #
Pilot screw (P.S.) 2" turns back PRE-SET (2# turns back)
Throttle cable play ←←