21-8 GS500K5/UK5/FK5/FUK5 (’05-MODEL)
CARBURETOR
ITEM
SPECIFICATION
GS500 P-02, 19, 24, 54
GS500F P-02, 19, 24, 54
GS500U P-19
GS500FU P-19
Carburetor type MIKUNI
BSR34
←
Bore size 34 mm ←
I.D. No. 01DN 01DP
Idle r/min 1 200 ± 100 r/min ←
Float height 13.0 ± 1.0 mm ←
Main jet (M.J.) #130 #135
Jet needle (J.N.) 5DH57-3rd ←
Needle jet (N.J.) P-5M ←
Throttle valve (Th.V.) #105 ←
Pilot jet (P.J.) #17.5 ←
Pilot screw (P.S.) 3 turns back ←
Throttle cable play 2.0 – 4.0 mm
(0.08 – 0.16 in)
←
ITEM
SPECIFICATION
GS500 P-09, 28
GS500F P-03, 28
GS500F P-33
Carburetor type MIKUNI
BSR34
←
Bore size 34 mm ←
I.D. No. 01DS 01DU
Idle r/min 1 200 ± 100 r/min ←
Float height 13.0 ± 1.0 mm ←
Main jet (M.J.) # ←
Jet needle (J.N.) 5DH59 5DH60
Needle jet (N.J.) ←
Throttle valve (Th.V.) #105 ←
Pilot jet (P.J.) # ←
Pilot screw (P.S.) PRE-SET (3 turns back) ←
Throttle cable play 2.0 – 4.0 mm
(0.08 – 0.16 in)
←
To Next Page
Loading...
