7-47
FRONT TURN SIGNAL LIGHT
To replace the turn signal light
bulb, follow these directions.
1. Remove the bolt and fasten-
ers. Remove the lower cover
1.
2. Remove the fasteners.
Remove the upper cover 2 by
unhooking the hook.
3. Remove the bolt and screw.
Remove the fairing cover 3.
4. Turn the socket counterclock-
wise and remove it.
5. Push in on the bulb, turn it to
the left, and pull it out.
6. To fit the replacement bulb,
push it in and twist it to the
right while pushing.
PartShark.com
877-999-5686
To Next Page
Loading...
