Suzuki LT-F400F - Page 139

Engine Mechanical: 1D-65
LT-F400/F left crankcase
1) Install the bearings with the special tool.
CAUTION
!
Use the suitable size attachment for each
bearing.
Special tool
(A): 09913–70210 (Bearing installer set)
2) Apply thread lock to the screws, and tighten them.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
LT-A400/F Generator cover
CAUTION
!
The removed bearings and oil seals must be
replaced with new ones.
Special tool
(A): 09913–70210 (Bearing installer set)
• Install the bearing with the special tool.
• Install the bearings with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
I827H1140302-02
I827H1140303-02
(A)
I827H1140292-02
(A)
I827H1140293-04