Suzuki LT-F400F - Page 138

1D-64 Engine Mechanical:
LT-A400/F left crankcase
1) Install the bearings with the special tool.
CAUTION
!
Use the suitable size attachment for each
bearing.
Special tool
(A): 09913–70210 (Bearing installer set)
2) Install the oil seal with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
NOTE
Replace the removed bearing with a new one.
3) Apply thread lock to the screws, and install the
retainers by tightening them.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
LT-F400/F right crankcase
1) Install the bearings with the special tool.
CAUTION
!
Use the suitable size attachment for each
bearing.
Special tool
(A): 09913–70210 (Bearing installer set)
2) Apply thread lock to the screws, and tighten them.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
(A)
I827H1140298-02
I827H1140299-02
(A)
I827H1140300-02
I827H1140301-02