2-15
SEAT LOCK
To remove the seat, move the seat
lock cable. Raise the rear end of the
seat and slide it backward.
To lock the seat, slide the seat hook
into the seat hook retainer and push
down firmly.
WARNING
Improperly installing the seat can
be hazardous.
Failure to install the seat properly
could allow the seat to move and
cause loss of rider control.
Make sure to properly position
and securely attach the seat when
you install it.
WARNING
Hot muffler can be hazardous.
The hot muffler can be hot enough
to burn you when pulling the seat
lock cable.
Be sure to visually check the seat
lock cable position when remov-
ing the seat.
To Next Page
Loading...
