3-3
Before you begin riding, you should
find a good place to practice the skills
you need to ride safely. Find a flat,
open area with enough space to prac-
tice new skills.
Make sure that it is legal to ride in the
area you have selected. Review local
laws to make sure you are not tres-
passing. Check with your ATV dealer
or call your local park ranger or police
department if you do not know where
you can ride.
Protect your riding areas. When you
ride, remember to keep the terrain in
good condition. Don’t destroy plant
life. Don’t litter and don’t bother wild-
life. With your help, your riding areas
can remain open for you to use in the
future.
After you have found a good place to
practice, review the controls on your
ATV before riding. Learn to find these
controls without looking for them. You
will not have time to look for them
when you are riding.
INSPECTION BEFORE RIDING
WARNING
Failure to inspect the ATV before
operating it can be hazardous.
Failure to perform proper mainte-
nance can also be hazardous.
Failure to inspect and maintain
your ATV increases the chances of
an accident or equipment damage.
Always inspect your ATV each
time you use it to make sure it is in
safe operating condition. Refer to
the INSPECTION AND MAINTE-
NANCE section in this owner’s
manual.
WARNING
Operating this ATV with improper
tires, or with improper or uneven
tire pressure can be hazardous.
If you use improper tires or
improper or uneven tire pressure,
you may lose control of the ATV.
This will increase your risk of an
accident.
Always use tire of the size and
type specified in this owner’s
manual. Always maintain proper
tire pressure as described in the
INSPECTION AND MAINTE-
NANCE section.
To Next Page
Loading...
